Skip to Content
  1. All Products
  2. All Products
  3. Tether Tools Rock Solid PowrGrip 3 for Smartphone RSPG30
Pricelist: - Pricelist
Pricelist: - Pricelist

Tether Tools Rock Solid PowrGrip 3 for Smartphone RSPG30

₹ 6,612.00 ₹ 6,612.00

Contact Us
Terms and Conditions
30-day money-back guarantee
Shipping: 2-3 Business Days
🔧 Specs & Features👍 Pros / What’s Good⚠️ Limitations / Things to Be Careful About

Here are the specs, pros & cons, and buying info for the Tether Tools Rock Solid PowrGrip 3 for Smartphone (RSPG30):

🔧 Specs & Features

FeatureDetail
Model / SKURSPG30 — Rock Solid PowrGrip 3 for Smartphone Polyline Corp+2B&H Photo Video+2
Type of MountVacuum suction mount (Wood’s PowrGrip pad) with a ball head assembly for a ¼‑20 mount B&H Photo Video+1
Pad Diameter3″ (~76 mm) B&H Photo Video+1
Max Load Capacity6 lb (≈ 2.7 kg) B&H Photo Video+1
Thread / Mounting Options¼‑20 mounting thread via the ball head, which allows you to attach standard camera / accessory hardware. Polyline Corp+1
Surfaces It Works OnSmooth, non‑porous surfaces: windows, mirrors, car bodies, boats, counters etc. Polyline Corp+2B&H Photo Video+2
Release MechanismHas a hand‑actuated pump to create the vacuum, with a red‑line indicator that warns when vacuum is dropping. For release, rubber tabs at the edge can be used. Polyline Corp+1
Other InclusionsPad protector for storage, ball head assembly. B&H Photo Video+1

👍 Pros / What’s Good

  • Very strong holding strength for a vacuum mount (6 lb) — allows not just phones but also some small cameras or heavier accessories within that limit. B&H Photo Video+1

  • Fast to mount & release; the vacuum pump mechanism provides strong adhesion.

  • Flexible angle adjustment via the ball head. If you have a ¼‑20 compatible arm or adapter, can use that too.

  • The pad protector helps keep the suction pad clean and unharmed when not in use.

  • Usually fairly compact, easy to carry for field‑use where you might want to mount a phone or small gear to glass or shiny surfaces etc.

⚠️ Limitations / Things to Be Careful About

  • The adhesion depends a lot on the smoothness, cleanliness, and non‑porosity of the surface. Dust, grease, or texture can reduce suction strength.

  • The 6 lb rating is good, but only if the load is well balanced and not offset far out. Long lever arms will stress the mount.

  • With time, vacuum holds can degrade (slow leaks etc.). The red‑indicator helps, but you’ll need to check occasionally in longer shoots.

  • Suction pads may wear or degrade, especially if used outdoors, heated glass or extreme temperatures.

  • For mobile surfaces (e.g. car exteriors, boat hulls), vibrations or movement can cause the mount to fail faster.